Patch with above changes plus a 5c lower temp alert a266263

UPDATE2: so simply adding cpufreq_enable_boost_support() to line 317 of qcom-cpufreq-hw.c I now can 'echo 1 > /sys/devices/system/cpu/cpufreq/boost' to enable turbo frequencies!! Well along with the opp table additions added above This seems fine to me, and basically how turbo works except that 2.96ghz is select-able? Anyway any ideas or suggestions on how to do this the correct way is appreciated. As soon as the temp drops the higher freqs become available again. It now lists 2.96ghz as usable and everything scales nicely under load, staying at 2.96ghz for a fair amount then auto adjusts to 2.84ghz max for even longer, then eventually under max load hits 2.75ghz max and stays. UPDATE: I just patched qcom-cpufreq-hw.c to remove turbo flag from last cpu freq, then dropped the cpu thermal trips by 5c and crit by 10c in sdm845.dtsi. So im worried my available freqs actually have turbo freqs mixed in? I find it a little suspicious that the turbo boost on the sdm850 is only 110mhz. Anyone been able to get turbo modes working? I see in a patch for qcom-cpufreq-hw here that his available freq maxout at 2.6ghz and 2803200 listed as his turbo freq. cat cat /sys/kernel/debug/opp/cpu4/opp:2956800000/turbo would return N so I added turbo-mode to the opp entry but it stil wont jump.

cpufreq-info lists 2.96 but also says 'frequency should be within 826 MHz and 2.84 GHz'Ĭat /sys/devices/system/cpu/cpufreq/policy4/scaling_boost_frequencies returns 2956800īut even in coldest conditions with all cpu cores maxed it never switches to 2.96ghz and I dont know of anyway to force turbo mode. I also see the same thing in regards to the 2.96ghz entry now as i do on previous kernels.

How to enable turbo boost yoga